Table of Contents
Advertisement
3. The names of indicators and their functions
C
B
A
2
1
A COLLECTIVE SETTINGS/INDIVIDUAL GROUP
SETTINGS DISPLAY:
COLLECTIVE is displayed when entering the same
settings for multiple groups.
GROUP is displayed when entering varying settings for
individual groups.
B OPERATION MODE DISPLAY:
Displays the current operating mode.
C CENTRALLY CONTROLLED DISPLAY:
Indicates when operation of group remote controller is
prohibited by the master controller.
D TEMPERATURE SETTING DISPLAY:
Displays the current temperature setting.
E ON/OFF DISPLAY FOR INDIVIDUAL GROUPS:
Displays whether a group's operations have been
stopped by showing a "s" mark in the operation status
display for each individual group.
F FAN SPEED DISPLAY:
Displays the current fan speed.
G AIR DIRECTION DISPLAY:
Displays the current direction of airflow.
H ROOM TEMPERATURE DISPLAY:
Indicates the room temperature of the group currently
being displayed (will blink when the temperature is
outside the range of 8°C to 39°C).
I HORIZONTAL BLOW DISPLAY:
Displays the operations of the horizontal blow. Not
displayed when operations are stopped.
6
D
E
CENTRALLY CONTROLLED
ON
˚C
COLLECTIVE
GROUP
TEMP.
GROUP
REMOTE CONTROLLER
PAC-SC30GRA
F G H I
ON/OFF
˚C
OFF
FILTER
NOT AVAILABLE
ON/OFF
GROUP
J TIMER OPERATION DISPLAY:
Displayed when a PROGRAM TIMER (sold separately)
is installed and the TIMER MODE is set.
K FILTER SIGN DISPLAY:
Blinks when the filter requires cleaning. Also the
GROUP SELECTION DISPLAY "s" of the specified
group will blink.
L OPERATIONAL STATUS DISPLAY BY GROUP:
ON: Run OFF: Stop BLINKING: Malfunction
M GROUP SELECTION DIPLAY: s
Displays the position of the selected group. All
registered groups are displayed on the collective
operation setting screen.
N VENTILATION DISPLAY:
Displays the operating condition of the ventilation unit
(if a ventilation unit has been installed).
O NOT AVAILABLE DISPLAY:
Blinked together with the relevant function when a
function switch has been pressed for a unit that is not
equipped with the function.
P OVERALL STATUS LAMP:
The lamp indicates the unit operation condition.
ON: One or more group(s) run.
OFF: All groups stopped.
J
K
3456
FILTER
78
CHECK
9
TEST RUN
0A
BLINKING: Malfunction.
Advertisement
Table of Contents
