TEFAL PRO STYLE ONE IT24 Series Manual page 11

5. DURING USE
1. If steam is not coming out anymore, this can be due to low water
level in tank.
2. Press the ON/OFF switch to the middle position and check that light
is switched OFF.
3. Remove the water tank.
4. Remove the cap then fill the water tank.
5. Fully screw the water tank cap and insert tank back in appliance.
6. Press the ON/OFF switch and select your desired steam concentration.
Check that light is switching on. Wait for 45 seconds before steaming.
6. AFTER USE
1. Press the ON/OFF switch to the middle position and check that light
is switched OFF.
2. Unplug the appliance.
3. Remove the water tank.
4. Unscrew the cap and then empty the water tank completely in a sink.
5. Screw back the cap and place the water tank back onto the appliance.
6. Wait for an hour for your appliance to cool before storing.
EN
11