Table of Contents
Advertisement
Available languages
Available languages
Initial start-up and functions
9 Remote Control
remote control. The remote control allows you to
LPF
10
Frequency switch).
HPF
11
4,000 Hz.
Frequency switch).
Output Channel
12
Speaker outputs to connect loudspeakers. The
impedance per channel must not be lower than
1 Ohm.
Phase
13
cancellations in the frequency response due to
phase shifts.
20
-
Bass Boost Frequency
14
This control is used to adjust the center frequency
of the Bass Boost from 40 Hz to 120 Hz. The adjust-
ed bass frequency can be enhanced from 0 to 9 dB
with control 15.
This is useful to emphasize or correct a determined
frequency of the subwoofer (kickbass).
Bass Boost Gain
15
This control is used to increase the adjusted Bass
Boost Frequency (see item 14) from 0 to 9 dB.
Level control
16
-
ule if the SPDIF Direct In switch is not set to "On"
position.
-
Advertisement
Table of Contents
