DIGISYNTHETIC DP Series User Manual page 3

The information furnished in this manual does not include all of the details of design and
engineering of this particular product; not does it cover every possible application or
situation concerning its usage, which may occur during the installation, operation or
maintenance of said DIGISYNTHETIC product.
THE PRODUCT REQUIRES CLASS 2 OUTPUT WIRING.
TO PREVENT ELECTRIC SHOCK, DO
NOT REMOVE TOP OR
COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
DISCONNECT POWER CORD BEFORE
REMOVING REAR PANEL COVER TO
ACCESS GAIN SWITCH.
CAUTION: Do not locate sensitive high-gain equipment such as preamplifiers or
tape decks directly above or below this unit. Because this amplifier has a high power
density, it has a strong magnetic field which can induce hum into unshielded devices
that are located nearby. This field is strongest just above and below the unit. If an
equipment rack is used, we recommend locating the amplifier(s) at the bottom of the
rack and the preamplifier or other sensitive equipment at the top.
The lightning bolt triangle is used alert the user to the risk of electric shock
The exclamation point triangle is used to alert the user to important operating
and/or maintenance instructions.
Printed on recycled paper.
Page 2
IMPORTANT
CAUTION
BOTTOM
WARNING
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
Magnetic Field
Shock Hazard - Do Not Enter
Choc Hasard - N*entrent
Schocke Hazard - Test Nicht
Urto Hazard - Do Non Entrano
Betrete