Assembly & Installation - NewAir NWC007SS00 Owner's Manual

ASSEMBLY & INSTALLATION
BEFORE USING YOUR APPLIANCE
•
Remove the exterior and interior packing; check to be sure you have all of
the following parts:
1. Instruction Manual
2. Wooden Shelves
3. Door Handle
4. Door hinges
•
Before connecting this appliance to the power source, let it stand upright
for approximately 2 hours. This will reduce the possibility of a malfunction
in the cooling system from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
ELECTRICAL CONNECTION
WARNING
Improper use of the grounded plug can result in electrical shock. If the power
cord is damaged, contact customer service immediately at
support@newair.com.
This appliance should be properly grounded for your safety. The power cord of
this appliance is equipped with a three-prong plug. Fit with a standard three
prong wall outlet only to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the
power cord supplied. For personal safety, this appliance must be properly
grounded.
This appliance requires a standard three-prong 115/120 Volt AC ~/60Hz
electrical ground wall outlet. Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is properly grounded. When a
standard 2-prong wall outlet is encountered, it is your responsibility and
obligation to have it replaced with a properly grounded 3-prong wall outlet.
The cord should be secured behind the appliance and not left exposed or
dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet
which has a voltage rating that matches the rating label on the appliance. This
8
newair.com