Troubleshooting - NewAir NWC007SS00 Owner's Manual

TROUBLESHOOTING

You can solve many common problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem
before calling the service technician.
Problem
Appliance is not
running
Appliance is not
cold enough
The compressor
starts and stops
frequently
Vibration
The appliance
mates a lot of
noise
The door does
not close
properly
Possible Causes and Solution
• Appliance is not plugged in.
• Appliance is not turned on.
• Check voltage of the installation
• Check if the circuit breaker or the fuse has blown.
• The door is opened too frequently.
• The door is not closed properly.
• The door is not sealing properly.
• Insufficient free space around the appliance.
• Check the temperature control setting.
• Check if ambient temperature is beyond appliance
operating temperature.
• The external temperature is high.
• The bottle count has exceeded the fridge capacity.
• The appliance is opened frequently.
• The door is not properly closed.
• The cellar has not been correctly set.
• Check and ensure that the appliance is level
• The rattling noise may come from the flow of the
refrigerant, which is normal.
• At the end of a cooling cycle, you can hear the noise of
water circulating.
• Expansion and contraction of the internal walls may
cause a cracking sound.
• The appliance is not level.
• Check if fan is in good condition.
• The appliance is not level.
• The door seal is dirty or damaged.
• The shelves are not positioned correctly.
• A part of the contents is preventing the door from
closing.
newair.com
19