Using Your Blender - Hamilton Beach 53620 Manual

Using Your Blender

IMPORTANT: The Personal Blending Jar and Cutting Blade Assembly
are subject to wear during normal use. Always inspect Jar for
nicks, chips, or cracks. Always inspect Cutting Blade Assembly for
broken, cracked, or loose blades. If Jar or Cutting Blade Assembly is
damaged, do not use. Call the provided customer service number to
1. Before blending, add
ingredients in order listed
on Personal Blending Jar.
Carefully place Collar with
Cutting Blade Assembly,
blade-side down, onto
Personal Blending Jar. Turn
clockwise until tight.
model 53620
2. Turn Jar upside down and
shake. Place onto Base. Move
Quiet Shield clockwise to
close.
w WARNING
ingredients. Pressure may build, causing jar to
pop off and hot ingredients to erupt.
w WARNING
carefully; it is very sharp. Make sure unit is
turned OFF ( ) and is unplugged.
obtain replacement parts.
PULSE – Use for short bursts. Blender will only run when PULSE
Button is held down.
BLEND – Use to blend continuously at high speed.
3. Plug into outlet. Press
BLEND Button for continuous
blending and press PULSE/
STOP Button when desired
consistency is reached.
Unplug. Move Quiet Shield
counterclockwise and remove
Jar from Base.
Burn Hazard. Do not blend hot
Laceration Hazard. Handle blade
4. Turn Jar right-side up and turn
Collar counterclockwise to
remove. Place Lid onto Jar and
turn clockwise to tighten.
5