Page 2
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 12. Blades are sharp; handle carefully—especially when assembling, 2.
Page 3
22. Do not leave blender unattended while it is operating. of the thermal cut-out, this appliance must not be supplied through 23. To disconnect cord, switch to OFF ( ). Then remove plug from an external switching device, such as a timer, or connected to a wall outlet.
Parts and Features BEFORE FIRST USE: After unpacking blender, wash everything except blender base in hot, soapy water. Dry thoroughly. Wipe blender base with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care should be taken when cleaning inside of blender jar as cutting blade assembly is very sharp.
Page 5
Parts and Features (cont.) Preparing Blender: After unpacking blender, wash everything except Lid: The lid is easy to put on, take off, and clean. Always use lid blender base in hot, soapy water. Dry thoroughly. Wipe blender base when machine is in operation and to pour. with a damp cloth or sponge.
Using Your Blender IMPORTANT: The blender jar and cutting blade assembly are subject to wear during normal use. Always inspect jar for nicks, chips, or cracks. Always inspect cutting blade assembly for broken, cracked, or loose blades. If jar or cutting blade assembly is damaged, do not use. Call toll- free customer service number to obtain replacement parts.
Page 7
Using Your Blender (cont.) 6. Close Quiet Shield. Blender will not operate until the back Quiet Shield locked at the right position and the front Quiet Shield door is completed in the down position at same time. 5. To secure, press back shield and blender base together.
Page 8
Using Your Blender (cont.) 8. Select speed and push 9. Press a different speed button 10. At the end of blending cycle, w WARNING Burn Hazard. button. during blending to increase or press PULSE ( )/CANCEL ( ) Do not fill blender jar with hot decrease blending speed.
Page 9
Using Personal Jar (optional) w WARNING Burn Hazard. Do not blend hot ingredients. Pressure may build, causing jar to pop off and hot ingredients to erupt. w WARNING Laceration Hazard. Handle blade carefully; it is very sharp. Make sure unit is turned OFF ( ) and is unplugged.
Blender Tips Blender Jar Tips • ALWAYS place liquid in blender jar first, then remaining • Avoid bumping or dropping blender when in operation or at any ingredients. time. • For best performance, minimum amount of liquid needed per • Cutting large whole fruits and vegetables may allow them to blend recipe is 1 cup (8 ounces/237 ml).
Page 11
How to Remove and Replace Quiet Shield 1. TO REMOVE: Start with front 2. Press tabs on both sides of 3. Slide back shield away from blender while moving back blender base. shield; separate front shield shield back with your thumbs. from back at rubber hinges.
Cleaning Your Blender w WARNING Electrical Shock Hazard. Disconnect power before cleaning. Do not immerse cord, plug, base, or motor in water or other liquid. w WARNING Burn Hazard. Metal parts under blending jar get hot after extended use. 1. Unplug. 4.
Troubleshooting Blender smells like it is burning. SMOOTHIE and PULSE ( )/CANCEL ( ) buttons are flashing. • Turn off blender and allow unit to cool. • The motor is not rotating and is experiencing a locked rotor • Although motors are tested during the manufacturing process, condition.
Need help?
Do you have a question about the 53604W-CN and is the answer not in the manual?
Questions and answers