Guarantee - Dometic CoolAir SP950C Installation Manual

Fastening frame for renault magnum
Hide thumbs Also See for CoolAir SP950C:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Guarantee

Fit the fastening frame and the CoolAir SP950 parking cooler on the Renault
Magnum as follows:
I
NOTE
Only install the condenser unit after you have attached the
mounting frame on the rear wall of the truck.
➤ Insert and tighten the four M8 x 30 bolts, eight U washers
M8 8.4 x 16 mm and four M8 retaining nuts (fig. 1, page 3) in the mount-
ing frame for the condenser unit.
➤ Remove the existing screw on the bracket (fig. 2 2, page 4).
➤ Fasten the fastening frame using the M8 x 25 ribbed bolts provided
(fig. 2 1 and 2, page 4).
➤ Place the condenser unit on the projecting bolts of the mounting frame
and bolt to the four U washers M8 8.4 x 16 mm and four M8 retaining
nuts.
➤ Check that all bolts are still tight after travelling approximately 200 km.
7
Guarantee
The statutory warranty period applies. If the product is defective, please
contact the service partner in your country (addresses on the back on the
instruction manual).
Our experts will be happy to help you and will discuss the warranty process
with you in more detail.
8
CoolAir SP950C
EN

Advertisement

Table of Contents
loading

Table of Contents