Regency BBNCH2148 Instructions

You will need a Phillips head screwdriver for this assembly.
A B C D
BBNCH2148
Organize your parts and hardware.
Hardware Components should include: A) 1 Allen Key
B) 6 Bolts C) 6 Wood Screws D) 6 Bolt Locks
E) 2 Sides F-1) 1 Frame G) 1 Runner H-1) 1 Cushion
Step 1: Attach runner(G) to the sides(E). Insert 2
bolt locks(D) into (G) then screw in 2 bolts(B) through the
legs into the bolt locks. DO NOT TIGHTEN ALL THE WAY!
D
B
E

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
● Check every 6 months for loose bolts; tighten as needed.
BBNCH2148-BBNCH2121 - INSTRUCTIONS
F-1
E
D
G
E
Any problems or questions call Regency Office Furniture at 1-866-816-9822
F-2
Organize your parts and hardware.
Hardware Components should include: A) 1 Allen Key
B) 6 Bolts C) 4 Wood Screws D) 6 Bolt Locks
E) 2 Sides F-2) 1 Frame G) 1 Runner H-2) 1 Cushion
Step 2: Connect Frame(F1-F2) to the sides(E) opposite the
runner. Flip unit so the frame is laying on the ground. Insert
remaining 4 bolt locks(D) into the frame. Once inserted
screw in 4 bolts(B) through legs into bolt locks and
TIGHTEN ALL BOLTS!
B
E
B
B
H-1
H-2
G-2
G-1
BBNCH2121
G
D D
H1-H2
E
B
B