Styling Nozzle; Cleaning And Maintenance - Bosch PHD 976 Series Instruction Manual

This makes the hair softer and easier to comb.
The static charge or "fy-away" tendencies in
the hair are reduced (= anti-static-effect).
The ion generator can be switched on in
combination with any level by pressing the
ion switch. The switch lights up. The ion
g enerator can be switched off by pressing
the switch again.
3
Cool button
The Cool function is ideal for
ʻsettingʼ the hair after drying.
It fixes the individual hair
s ections with the cool airfow.
Press the Cool button
a ctivate the Cool function in any
setting.
The LED display glows blue additionally
when the Cool function is activated.
Press the Cool button
the Cool function.
Diffuser
The diffuser is ideal for straight or damaged
hair. It gives fine, long or medium-length
hair more volume.
Hold the tips of the diffuser
upwards, tilt your head sideways
and run the diffuser into your
hair from below, lifting it up. The
hair should rest gently between
the individual fingers of the
diffuser while drying.
Use
● Set the fan and temperature to a low
setting.
● To 'set' the volume and natural curls,
press the Cool button
● Repeat the process with individual
sections of hair.
Warning! The styling nozzle and diffuser
can become hot. Allow them to cool down
before detaching.
3
to
3
again to switch off
3
.

Styling nozzle

The styling nozzle is specially designed for
drying and styling sections of hair.
Attach the styling nozzle to the
appliance. Make sure it clicks
into place. The nozzle can be
turned as required.
Use
● Set the fan and temperature to a higher
setting.
● Direct the air stream right onto the section
of hair you want to style.
● To fix the hair, switch on the Cool
3
b utton and repeat the process.
Important: The nozzle should never actually
touch the hair.
Warning! The styling nozzle and diffuser
can become hot. Allow them to cool down
before detaching.
For more information on Bosch styling, visit
www.bosch-personalstyle.com

Cleaning and maintenance

Always allow the appliance to cool down
completely before storing or cleaning.
¡
Danger of electric shock!
Unplug before cleaning.
Never place the appliance into water.
Do not use a steam cleaner.
● Simply wipe the appliance with a damp
cloth and then dry it off. Do not use strong
or abrasive cleaning agents.
● Turn the air inlet grill in the direction of
the arrow and remove. Rinse down and
dry the grill or clean with a soft brush.
After cleaning, position the air inlet grill on
straight and fix in place by turning in the
opposite direction to the arrow.
● Remove the accessory parts and clean
them. Use only after they have dried off
completely.
en
9