Maintenance; Troubleshooting - Teccpo TAPS22P Manual

● Wood products such as lumber, hardwood, plywood, composition board and paneling
● plastic and soft metal.
● tile and backerboard
Blade selection(see pic. K)
Three blades are available for this saw. Each is for
cutting different materials. Select the correct blade
for your applications.
24 teeth TCT saw blade (a) is for cutting wood,
plastic and other soft materials
44 teeth HSS saw blade (c) is for cutting plastic and
soft metal.
Diamand blade (b) is for cutting tile and backerboard.

MAINTENANCE

WARNING: Unplug tool before installing or removing accessories, before adjusting, or when
making repairs. Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside
the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjust-
ment (other than those listed
in this manual) should be performed by authorized service centers or other qualified service organiza-
tions, always using identical replacement parts.
Problem
Unit will not start
Technology Creates Power

Troubleshooting

Possible Cause
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped
Cord or switch is damaged
- 10 -
Possible Solution
Plug tool into a
working outlet.
Replace circuit fuse.(if
product repeatedly cause the
circuit fuse to blow, discontinue
use immediately and have it
serviced at service center )
Reset circuit breaker.(if the
product repeatedly causes the
circuit breaker to trip, discontin-
ue use immediately and have it
serviced at service center )
Have cord or switch replaced at
service center
the