Overview; Included - oventrop CS-BS-1 WLAN Manual

• Internet access to the system data via Oventrop-Portal
• Comfortable system parameterisation via the RPT Parameterisation Tool pos-
sible
• Suitable for all Oventrop controllers with S-Bus
• WLAN functionality
• Software updates
Easy installation in only three steps
technical data
Housing: plastic
Protection type: IP 20 / EN 60529
Protection class: III
Ambient temperature: 0 ... 40 °C
Dimensions: 95 × 70 × 25 mm
Mounting: wall mounting (optional)
Display: operating control LED
Interfaces: S-Bus for the connection to the Oventrop controller, 10/100 Base TX
Ethernet, Auto MDIX, WLAN 2.4~2.4835 GHz
WLAN encryption WEP, WPA / PSK, WPA2 / PSK
Power consumption < 1.75 W
Power supply:
input voltage of mains adapter: 100 ... 240 V~ (50 ... 60 Hz)
nominal current: 146 mA
input voltage of Datalog: 12 V DC ± 5 %
24
2
Oventrop-
Portal
If one of the items mentioned below is missing or defective, please contact your
distributor:
1 Datalog CS-BS-1 WLAN, mains adapter and S-Bus cablepre-connected
2 Interchangeable mains adapter plugs (EURO, UK, USA, AUS)
3 Network cable (CAT5e, RJ45), 2 m
4 Wall plugs, screws and rubber pads
Manual (not illustrated)

Included

1
2
3
4