Nikon Z 5 Reference Manual page 361

D
Calculating the Length of the Final Movie
•
The total number of frames in the final movie can be calculated by
dividing the shooting time selected in Step 2 by the interval, rounding
up, and adding 1.
•
The length of the final movie can then be calculated by dividing the
number of shots by the frame rate selected for [Frame size/frame rate]
(for example, a 48-frame movie recorded with [1920×1080; 24p]
selected for [Frame size/frame rate] will be about two seconds long).
•
The maximum length for time-lapse movies is 20 minutes.
D
Image Review
The K button cannot be used to view pictures while shooting is in
progress. The current frame will however be displayed for a few seconds
after each shot if [On] or [On (monitor only)] is selected for [Image
review] in the playback menu. Note that other playback operations
cannot be performed while the frame is displayed. The current frame may
not be displayed if the interval is very short.
Frame size/frame rate
1
Length recorded/maximum
2
length
1
Memory card indicator
3
2
3
C The Photo Shooting Menu: Shooting Options
319