Link Mode - Nikon Z 5 Reference Manual

Link Mode

Choose a link mode for WR-R10 wireless remote controllers
mounted on other cameras or radio-controlled flash units that
support Advanced Wireless Lighting. Be sure that the same
mode is selected for the other devices.
Option
[Pairing]
The camera connects only to devices with which it has
previously been paired. Press the pairing button on
the WR-R10 wireless remote controller connected to
the camera to pair it with other devices.
•
As camera will not communicate with devices with
which it has not been paired, this option can be
used to prevent signal interference from other
devices in the vicinity.
•
Given that each device must be paired separately,
however, PIN is recommended when connecting to
a large number of devices.
Description
B The Setup Menu: Camera Setup
439