Vaillant geoTHERM VWS Series Installation Instructions Manual page 39

e
Danger!
Risk of electric shock!
If the vrnetDIALOG accessory is not
being used or does not receive its
power supply from the heat pump, the
vrnetDIALOG connecting plug (230 V
supply) must remain secured inside the
heat pump.
Fig. 6.22 Fitting the front lower cladding
• Press the lower cladding panel into the spring retainer
on the casing and securely screw the console frame to
the casing using the two screws, as shown in Fig. 6.5.
Installation instructions geoTHERM VWS/VWW 0020057444_01
Electrical installation 6
Fig. 6.23 Fitting the upper cover
• Attach the upper cover and screw it down securely
with the two associated screws.
• Press the pipe access cover into the spring retainer.
39