OEM Tools 24813 Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect
carefully for any damage that may
have occurred during transit. Check
for loose, missing, or damaged
parts. If any damage is observed,
a shipping damage claim must be
filed with carrier. Do not use Press
Pin Set if broken, bent, cracked or
damaged parts (including labels)
are noted. Any Press Pin Set that
appears damaged in any way,
operates abnormally or is missing
parts should be removed from
service immediately. If you suspect
that the Press Pin Set was subjected
to a shock load (a load that was
dropped suddenly, unexpectedly,
etc.) immediately discontinue use
until it has been checked by a factory
authorized service center.
WARNING
The following safety information is provided as guidelines to help you operate your Press Pin Set under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain
that anyone that uses the equipment understands and follows these safety instructions as well.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Notes
: Provide clarity and helpful information.
09/14
2014 ©OEM-TOOLS
24813
PRESS PIN SET