Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
24495
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.
OSCILLATING TOOL
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully
for any damage that may have occurred
during transit. Check for loose, missing,
or damaged parts. If any damage is
observed, a shipping damage claim
must be filed with carrier. Do not use
the OEMTOOLS
Oscillating Tool if
®
broken, bent, cracked or damaged
parts (including labels) are noted. Any
Oscillating Tool that appears damaged
in any way, operates abnormally or
is missing parts should be removed
from service immediately. If you
suspect that the Oscillating Tool was
subjected to shock load (a load that was
dropped suddenly, unexpectedly, etc.)
immediately discontinue use until it has
been checked by a factory authorized
service center.
WARNING
The following safety information is provided as a guideline to help you operate your Oscillating Tool under the safest possible conditions. Any tool or piece of
equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to
provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service
system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and
follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
NOTES:
Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
Product!
®
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This product is designed for certain applications only. OEMTOOLS
cannot be responsible for issues arising from modification. We strongly
®
recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to
a particular application, DO NOT use the product until you have first contacted customer service to determine if it can or should be performed on the
product.
WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the state of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
1/17
®
2017 OEMTOOLS
Advertisement
Table of Contents
Related Manuals for OEM Tools 24495
Summary of Contents for OEM Tools 24495
- Page 1 Operating Instructions and Parts Manual 24495 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
-
Page 2: Work Area Safety
Operating Instructions and Parts Manual 24495 OSCILLATING TOOL POWER TOOL SAFETY power tool that cannot be controlled with the switch is dangerous and must be repaired. Read and understand all safety warnings and instructions. Failure to 3. Disconnect the plug from the power source and/or the battery pack from... - Page 3 Operating Instructions and Parts Manual 24495 OSCILLATING TOOL EXTENSION CORD SAFETY PURPOSE The OEMTOOLS Oscillating Tool is used for removing delicate pieces of ® WARNING trim. This tool is designed for many carpentry, electrical, plumbing, tile Keep the extension cord clear of the working area. Position the repair jobs and most general household maintenance.
-
Page 4: On/Off Switch
Fig. 5 Fig. 12 Fig. 1 Fig. 7 Operating Instructions and Parts Manual 24495 OSCILLATING TOOL INSTALLING SANDPAPER Fig. 3 Project Accessory Speed Fig. 8 1. Install the hook and loop sanding pad (1) onto the tool. (Figure 2) Balsa Wood Wood Blade Fig. -
Page 5: Using The Scraper Blade
Operating Instructions and Parts Manual 24495 Fig. 11 OSCILLATING TOOL Fig. 6 CUTTING A HOLE IN WOOD FLOORING TO INSTALL A 4. Set the speed to the highest speed. (Figure 5) HEATING VENT The oscillating tool can be used to cut a hole in wood flooring for installing a heating vent. -
Page 6: Maintenance
Operating Instructions and Parts Manual 24495 Fig. 10 OSCILLATING TOOL Fig. 5 Fig. 1 MAINTENANCE NOTE: Make sure you note the positioning of the speed control wheel and all the wires. They must be placed in exactly the same position when WARNING reassembling the handle. - Page 7 Operating Instructions and Parts Manual 24495 OSCILLATING TOOL Parts Diagram Parts List Figure Description Qty. Shaft Ring Screw Gear Housing Ball Bearing Snap Ring Fork Needle Bearing Oil Seal Block Bushing Speed Trigger Magnet Screw Square Washer Ring Bearing Support...
- Page 8 Operating Instructions and Parts Manual 24495 OSCILLATING TOOL OEMTOOLS ONE YEAR WARRANTY ® If for up to one year from the date of purchase of this OEMTOOLS product you find any defect in material or workmanship, through ® normal usage, return it to the place of purchase, or to OEMTOOLS for repair or replacement at our discretion.