Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing,
or damaged parts. If any damage is observed, a shipping
damage claim must be filed with carrier. DO NOT use the
OEMTOOLS
Jig Saw if broken, bent, cracked or damaged
®
parts (including labels) are noted. Any Jig Saw that appears
damaged in any way, operates abnormally or is missing
parts should be removed from service immediately. If you
suspect that the Jig Saw was subjected to shock load
(a load that was dropped suddenly, unexpectedly, etc.)
immediately discontinue use until it has been checked by a
factory authorized service center.
*Voltage is measured without workload. Maximum initial
battery voltage after charging. Nominal voltage is 18 Volts.
WARNING
The following safety information is provided as a guideline to help you operate your Jig Saw under the safest possible conditions.
Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or
not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.
Please read and retain these instructions for the continued safe use of your service system. Failure to follow instructions listed
below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows
these safety instructions as well.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result
in property damage.
NOTES:
Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. This product is designed for certain applications only. OEMTOOLS
for issues arising from modification. We strongly recommend this product is not modified and/or used for any application other
than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until
you have first contacted customer service to determine if it can or should be performed on the product.
WARNING: This product can expose you to chemicals, including acrylonitrile, which are known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
11/18
2018 OEMTOOLS
™
Product!
®
20V MAX* LI-ION
JIG SAW
cannot be responsible
®
24489
Advertisement
Table of Contents
Related Manuals for OEM Tools 24489
Summary of Contents for OEM Tools 24489
- Page 1 Operating Instructions and Parts Manual 24489 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
-
Page 2: Power Tool Safety
Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW POWER TOOL SAFETY 6. Dress properly. DO NOT wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving WARNING parts. Loose clothes, jewelry or long hair can be caught Read and understand all safety warnings and instructions. -
Page 3: Product Specifications
Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW 4. Under abusive conditions, liquid may be ejected from 14. Never use dull or damaged blades. Sharp blades must the battery; avoid contact. If contact accidentally occurs, be handled with care. Damaged blades can snap during flush with water. -
Page 4: Led Worklight
Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW INSTRUCTIONS VARIABLE SPEED CONTROL Always wear safety goggles and gloves. Simply apply light pressure to the On/Off trigger to start the jigsaw on a slow speed. Increasing the pressure on the INSTALLING A BLADE trigger will increase the speed of the jigsaw. -
Page 5: Plunge Cutting
Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW NOTE: Apply enough downward pressure to keep the jigsaw WARNING steady and only enough forward pressure to keep the blade Always charge the battery pack indoors in a well-ventilated cutting freely. - Page 6 Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW Parts List Figure Description Qty. Figure Description Qty. Switch Lock Lever Saw Care Switch Rubber Mat Screw Rear Bearing Cooling Block Spring Electrode Plate Front Bearing Dust Baffle Holder...
- Page 7 Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW Parts Diagram Don’t forget to register your new OEMTOOLS product at www.oem-tools.com. ® Intertek This symbol designates that this tool is listed with U.S. 3042597 requirements by ETL Testing Laboratories, Inc. Conforms JD5242K to UL Std.
- Page 8 Operating Instructions and Parts Manual 24489 20V MAX* LI-ION JIG SAW OEMTOOLS ONE YEAR WARRANTY ® If for up to one year from the date of purchase of this OEMTOOLS product you find any defect in material ® or workmanship, through normal usage, return it to the place of purchase, or to OEMTOOLS for repair ®...