OEM Tools 24498 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual 24498
Please read and save these instructions. Read through this owner's manual carefully before using product.
Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with
instructions could result in personal injury and/or damage to product or property. Please retain instructions for
future reference.
HEAT GUN
UNPACKING
After unpacking unit, inspect carefully for
any damage that may have occurred during
transit. Check for loose, missing, or damaged
parts. If any damage is observed, a shipping
damage claim must be filed with carrier. Do
not use the OEMTOOLS Heat Gun if broken,
®
bent, cracked or damaged parts (including
labels) are noted. Any Heat Gun that appears
damaged in any way, operates abnormally
or is missing parts should be removed from
service immediately. If you suspect that the
Heat Gun was subjected to shock load (a load
that was dropped suddenly, unexpectedly,
etc.) immediately discontinue use until it has
been checked by a factory authorized service
center.
WARNING
The following safety information is provided as a guideline to help you operate your Heat Gun under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions
are not known or not followed. The following safety instructions are to provide the user with the information necessary
for safe use and operation. Please read and retain these instructions for the continued safe use of your tool. Failure to
follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment
understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in
property damage.
NOTES: Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS Product!
®
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. This product is designed for certain applications only. OEMTOOLS cannot be responsible
®
for issues arising from modification. We strongly recommend this product is not modified and/or used for any application
other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
product until you have first contacted customer service to determine if it can or should be performed on the product.
WARNING
:
This product can expose you to chemicals, including acrylonitrile, which are known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
10/18
2018 OEMTOOLS
™