Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with carrier.
DO NOT use the OEMTOOLS
bent, cracked or damaged parts (including labels) are
noted. Any Rotary Tool that appears damaged in any
way, operates abnormally, or is missing parts should be
removed from service immediately. If you suspect that
the Rotary Tool was subjected to shock load (a load that
was dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Rotary Tool under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are
not known or not followed. The following safety instructions are to provide the user with the information necessary for safe use
and operation. Please read and retain these instructions for the continued safe use of your tool. Failure to follow instructions
listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows
these safety instructions as well.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES: Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar
with this product before you begin using it. This product is designed for certain applications only. OEMTOOLS
cannot be responsible for issues arising from modification. We strongly recommend this product is not modified and/
or used for any application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the product until you have first contacted customer service to determine if it can or should be
performed on the product.
4/18
2018 OEMTOOLS
™
Rotary Tool if broken,
™
Product!
™
1
24664
ROTARY TOOL
™
Advertisement
Table of Contents
Related Manuals for OEM Tools 24664
Summary of Contents for OEM Tools 24664
- Page 1 Operating Instructions and Parts Manual 24664 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
-
Page 2: Power Tool Safety
Operating Instructions and Parts Manual 24664 ROTARY TOOL POWER TOOL SAFETY WARNING: Read all safety warnings and instructions. 2. Use personal protective equipment. Always wear eye Failure to follow the warnings and instructions may result protection. Protective equipment such as dust mask, in electric shock, fire, and/or serious injury. -
Page 3: Important Safety Instructions
Operating Instructions and Parts Manual 24664 ROTARY TOOL 6. Keep cutting tools sharp and clean. Properly SPECIFIC SAFETY RULES maintained cutting tools with sharp cutting edges are 1. Hold the tool by its insulated gripping surfaces when less likely to bind and are easier to control. -
Page 4: Product Specifications
Operating Instructions and Parts Manual 24664 ROTARY TOOL PURPOSE 9. Never hold the workpiece in one hand and the tool in the other hand when in use. Never place the hands The OEMTOOLS Rotary Tool with 35 Piece Accessory ™... -
Page 5: On/Off Switch
Operating Instructions and Parts Manual 24664 ROTARY TOOL ASSEMBLY AND OPERATION 5. Insert the replacement collet into the spindle and SPEED SELECTION replace the collet nut by turning it clockwise while holding the spindle lock button down. Set Rotary Tool speed by rotating the variable speed control dial (1) to the appropriate speed (see Fig.1). -
Page 6: Selecting Proper Speeds
Operating Instructions and Parts Manual 24664 ROTARY TOOL SELECTING PROPER SPEEDS Operation Speed Different speeds are required depending upon the Cutting Metal 5 – MAX type of operation being performed. The following chart outlines those basic speeds: Sanding Wood 5 – MAX CAMERA-READY LOGOTYPE –... -
Page 7: Parts List
Operating Instructions and Parts Manual 24664 ROTARY TOOL PARTS LIST Item # Description Quantity Item # Description Quantity Screw Rotor Left Enclosure Screw Bearing 626-2Z Cord Clamp Output Shaft Cord Guard Collet Power Plug Collet Nut Variable Speed PCB Head Nut... - Page 8 Operating Instructions and Parts Manual 24664 ROTARY TOOL OEMTOOLS™ ONE YEAR WARRANTY For up to one year from the date of purchase of this OEMTOOLS product, if you find any defect in material or ™ workmanship (through normal usage), return it to the place of purchase or to OEMTOOLS for repair or replacement at ™...