Subscribe to Our Youtube Channel
Related Manuals for Origin live Aurora Mk2
Summary of Contents for Origin live Aurora Mk2
- Page 1 Mk2 Turntable Manual for Aurora, Calypso, Resolution & Sovereign NOTE : Speed must be set accurately after 2 day run in Page 1...
- Page 2 Motor pod An Origin Live turntable is simple to set up. If you have a problem, please refer to the instructions - failing this, you...
-
Page 3: Mounting Origin Live Arms
Thread the threaded vta adjuster onto your arm if it is an Origin Live Encounter or above. If your deck is a Sovereign and you have an Origin Live can provide the correct cut out in the sub-chassis or Encounter arm or above - do not fit the threaded vta adjuster. The armboard for other makes of arm and after this refer to your arm adjuster must be oriented such that the largest diameter is uppermost. - Page 4 If this is not the case, move the pod to Do not use any other oil than Origin Live oil. achieve correct pulley position. This means that when you hook...
-
Page 5: S E T T I N G T H E M O T O R S P E E D
When the rotary switch on the pod is turned fully anti- clockwise and the line on the knob aligns to the LED, the motor is off. One click of the switch clockwise is 33.3 rpm - The second click clockwise is 45rpm NOTES: The speed should only be finally set with the pod in it’s FINAL position and at normal room Set the belt tension by positioning the motor housing. -
Page 6: Set The Arm Fastening Tightness
If the screw reaches the end of it’s travel you can threaded VTA adjuster supplied with the deck for Origin Live usually hear a faint clicking. You will not damage the preset by and Rega derived arms. One complete turn of the adjuster over turning it as slippage occurs. -
Page 7: Troubleshooting
If you withdraw the sub-platter spindle more than a few times the 3 screws holding the motor to the top plate. you should put in a drop of oil to compensate for any possible If you have checked the above and are still having trouble please loss. - Page 8 R E P A C K I N G M E T H O D Please read carefully and do not deviate, do not cut up foam etc or damage will result - see seperate sheet for Sovereign packing instructions. ARMBOARD PAD Ensure base foam is in position in box as...
Need help?
Do you have a question about the Aurora Mk2 and is the answer not in the manual?
Questions and answers