Advertisement
My ICON™ Cordless Vacuum has no power/lights
flashing | Support
•
Check the outlet being used to charge machine
o
Test the outlet with a different device, like a cell phone charger or small appliance
•
Verify correct charger is being used
o
Only this charger should be used
•
Inspect charger prongs & cord
o
If cord is damaged (not smooth) or prongs are damaged, charger should be replaced
•
Connect charger to the charging port on the back of the hand vac & plug into wall outlet
•
The white display lights on the battery icon should light up
o
Contact Us
If not, please
•
Unplug from charger & press power button
•
If the lights are blinking next to the cleaning mode buttons see selections below:
o
Blinking lights next to the top single dot >
•
Blinking lights next to the center 2 dots > There is an obstruction in the brush roll
Brush Not Turning Steps
> See
Contact Us
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bissell ICON Series
Summary of Contents for Bissell ICON Series
- Page 1 My ICON™ Cordless Vacuum has no power/lights flashing | Support • Check the outlet being used to charge machine Test the outlet with a different device, like a cell phone charger or small appliance • Verify correct charger is being used Only this charger should be used •...
- Page 2 • Contact Us Blinking lights next to the bottom 3 dots & the battery icon blinks > • Blinking lights next to 1, 2 and 3 dots & battery icon blinks > There is an air flow blockage > No Suction Steps Contact Us If the machine continues to not have power, please...
Need help?
Do you have a question about the ICON Series and is the answer not in the manual?
Questions and answers