Shooting
Fulfill the Analysis Function
Procedure
800.561.8187
Setting the Alarm temperature
Follow this procedure to set the Alarm temperature
1
Press the [C] key or click the
Press LEFT arrow on the omni selector to select
[Spot], press the ENTER key to add a spot and
2
press the ENTER key again to call the setting
window of the spot.
Press UP/DOWN arrow on the omni selector to
select [Alarm Temp:] or [Alarm Mode], press LEFT
3
or RIGHT arrow to set the value of alarm
temperature or mode.
www.
information@itm.com
.com
icon
51