6.8 To adjust Volume and select audio source
If [Speaker] button is clicked, the Volume control screen appears.
To adjust volume, slide up or down the volume knob.
If exclude an unnecessary audio source, click the source and remove the "✓" mark.
Moreover if the All mute is clicked and enter the "✓" mark, all sources are muted.
Audio Source
All Mute
Note
If audio is not outputted in playback, please confirm audio volume level
and mute selection in the Sound and Audio Device Properties which is
opened from the Control Panel.
51
Chapter6 Playback Operation
Playback Software / Instruction Manual
Speaker
Volume