Zoom 3095F Quick Start Manual page 8

Next, connect the modem to your computer
Your computer should be shut down.
1
Connect the cable end of the modem to any USB port on
your computer.
2
Turn your computer back on.
3
Windows will install the hardware on your system.
Windows 98: A message appears indicating that
Windows is installing software for the V92 USB
Faxmodem.
4
Connect the supplied phone cord to the phone jack on the
modem. Plug the other end of the cord into the wall jack just
as you would a telephone.
Finally, confirm a successful installation
Your computer should be turned on.
1
Open Control Panel and double-click the Phone and
Modem Options or the Modems icon.
2
If prompted, enter your Location Information and then click
the Modems tab.
3
In the Modems Properties dialog box, click the entry for
your modem and then click Properties.
4
Click the Diagnostics or Modem tab and then click More
info or Query Modem. You will see a list of AT commands
and responses, indicating that your modem is properly
connected.
5
Click OK or Close twice to exit.
That's it! Your installation is complete. If your PC had a modem
already installed, please read the following note.
8