Philips Jewel FC9069 Manual page 8

English
8
- If you want to pause for a moment, you can park the tube in a convenient position by inserting
the ridge on the nozzle into the parking slot (Fig. 19).
Active Fragrance Control (specific types only)
The scent granules have been specially developed for use in your Philips vacuum cleaner. Only use
the Philips s-fresh ` scent granules in your vacuum cleaner.
If the vacuum cleaner is equipped with Active Fragrance Control, keep it out of the reach of
children, both during and after use. Store the vacuum cleaner in a locked cupboard if there are
small children in the house.
The scent granules are not edible.
In case of eye contact, flush immediately with plenty of water.
Filling the cartridge
1 Place your thumb and index finger on the sides of the cartridge. Remove the cartridge from
the holder by pressing on the disc (Fig. 0).
 Remove the cap of the cartridge by pulling while applying pressure on the small pressing
points (Fig. 1).
 Open the package at the small opening at the top.
4 Fill the cartridge with the contents of one whole package of scent granules.
5 Close the cartridge by putting the cap back onto it ('click').
6 Re-insert the cartridge into the holder ('click'). It only fits into the holder in one
way (Fig. ).
Replace the granules when the cartridge no longer emits any fragrance.
Setting the fragrance level
- You can set the fragrance level by turning the cartridge forwards (maximum emission) and
backwards (minimum emission) (Fig. 23).
- When you store the vacuum cleaner or don't want any fragrance to be emitted, close the
cartridge by turning it backwards until the openings of the cartridge are no longer visible.
storage
1 Switch the appliance off and remove the mains plug from the wall socket.
 Rewind the mains cord by pressing the cord rewind button (Fig. 24).
 You can put the appliance in upright position and attach the nozzle to the appliance by
inserting the ridge on the nozzle into the slot (Fig. 5).
4 Always put the Tri-Active nozzle in the carpet setting when you store it and prevent the side
brushes from becoming bent (Fig. 8).
Replacing the dustbag
Always unplug the appliance before replacing the dustbag.
- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the floor (Fig. 26).
1 Open the cover by pulling it upwards (Fig. 27).
 Lift the dustbag holder out of the appliance (Fig. 8).