Wahl 1588 Operating Manual page 10

E N G L I S H
Maintenance
Warning! Injuries and material damage due to incorrect
handling.
f Switch off the appliance before cleaning it or performing
any maintenance and disconnect it from the mains.
Cleaning and care
Danger! Electric shock due to penetration of liquid.
de
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
en
Caution! Danger from aggressive chemicals.
fr
Aggressive chemicals could damage the appliance and
accessories.
it
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
es
mended by the manufacturer.
pt
Accessories and spare parts are available from your dealer or
nl
our service centre.
da
f Remove the attachment comb (Fig. 5ⓑ) and lift the blade set out
of the housing (Fig. 7ⓐ). Use the cleaning brush to remove any cut
sv
hairs from the housing opening and from the blade set (Fig. 8).
f Only wipe the appliance with a soft, slightly damp cloth.
no
f Oil the blade set with blade set oil (Fig. 9).
fi
f For a good and long-lasting cutting performance, it is
important to oil the blade set frequently.
tr
f If the cutting performance deteriorates after long use
despite regular cleaning and oiling, the blade set should
pl
be replaced.
cs
Changing the blade set
sk
1. Slide the blade set off the housing in the direction of the arrow
(Fig. 7ⓐ). Remove the blade set.
hr
2. Replace the blade set by hooking it into the housing and pressing it
down until it clicks into position (Fig. 7ⓑ).
hu
sl
Problem solving
ro
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
bg
f Clean and oil the blade set (Fig. 8/9). If this does not resolve the
problem, replace the blade set (Fig. 7).
ru
Skin injury
uk
Cause: Too much pressure on the skin.
et
f Reduce pressure when cutting close to skin.
lv
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use and
lt
replace the blade set if necessary.
el
10
ar
Battery operating time is too short
Cause: A blade set that is very dirty and has not been oiled can reduce
the available battery operating time substantially!
f Carefully clean and oil the blade set (Fig. 8/9). If the blade set is
clean and oiled and the battery operating time is still far too short,
it is likely that the batteries are nearing the end of their life.
Cause: Battery power indicator is imprecise.
f Fully discharge the appliance before fully recharging it in one unin-
terrupted charging process.
Charging indicator does not light up
Cause: Appliance has not been correctly placed on the charging stand.
f Ensure that the appliance has been correctly placed on the charg-
ing stand.
Cause: appliance socket is dirty.
f Clean the appliance socket.
Cause: Defective power supply.
f Make sure that there is a faultless contact between the plug-in
transformer and the socket.
f Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to repair the
appliance yourself!
Disposal
Handle with care! Environmental damage in the event of
incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protection
and prevent any potentially harmful impact on people
and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electrical and electronic appliances
in the European Community:
Within the European Community, national regulations are
specified for the disposal of electrical appliances, based
on EU Waste Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this, the appliance
can no longer be disposed of with the local or domestic
waste.The appliance will be accepted free of charge by local
collection points or recycling centres. The packaging for this
product is made from recyclable materials. Dispose of this in
an environmentally friendly manner by recycling it.