Table of Contents
Advertisement
Recording Files
Video Recording
Press the PLAY/REC button to
select recording mode.
'SELECT
I
PLAY/REC
•
Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select" (video) mode.
The switch returns
to the original
position when it is
released.
The" lamp on the camera lights up.
Press the REC button to start
recording.
Approximate remaining
time for recording
REC
• To stop recording
Press the REC button again.
• To change the picture quality
Change the settings in [QUALITY].
(0' pg. 67)
• To register a file to an event
See page 23.
BID
• The video recording mode is automatically selected when you turn the camera's power off and
then on again.
• If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the power/
mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as
zooming.
• Video files are given the names MOV001.TOD to MOV009.TOD, MOVOOA.TOD to
MOVOOF.TOD, and MOV010.TOD in order of recording.
• A new file will be created for every 4 GB or approx. 19 minutes of continuous shooting.
• This camera records video in MPEG2 format compliant with SD-VIDEO format.
• Do not move or shake the camera suddenly during recording. If you do so, the driving sound
(hum) of the hard disk may be recorded.
20
Advertisement
Table of Contents
