Table of Contents
Advertisement
OFF: The date/time does not appear.
[AUTO]: The date/time appears for approx. 5 seconds in
the following cases.
• When the power/mode switch is set from OFF to ON
• When playback starts
ON: The date/time is always displayed.
EXECUTE: Performs this function.
[CANCEL]: Returns to the menu screen without
executing reset.
Adjust the brightness of the display by moving the set
lever to
</),
then press down.
OFF: Disables the function.
[ON]: Activates the function.
To turn the camera on when the drop detection
worked, set the power/mode switch to OFF, and to
ON again.
emma
Setting this function to off increases the risks of damaging
the built-in hard disk if the camera is accidentally dropped.
[BLUE] / RED / GREEN
OFF: The camera does not receive the signal from the
remote control.
[ON]: Enables operation with the remote control.
OFF: Disables the function.
[ON]: Activates the function.
mmD
• The demonstration only works when the AC adapter is
connected, not with the battery.
• If an SO card is in the camera, demonstration will not take
place even if this mode is set to [ON].
OFF: Turns off the operation sound.
[MELODY]: The melody sounds when operations are
performed.
69
Advertisement
Table of Contents
