Advertisement
3.
Secure the left light assembly and right light
assembly to the left light mount and right light
mount using the hex nut on the light assemblies
(Figure
16).
Note:
Install the lights with the low beam toward
the outer edge of the machine.
Look at the bottom of the lights for high beam
and low beam orientation.
Figure 16
1. Light assembly
2. Light mount
4.
Apply the yellow reflective tape to the left light
base and right light base using the dimensions
shown in
Figure
17.
Figure 17
1. 14.25 to 14.86 cm (5-5/8 to 5-7/8 inches)
g303646
3. Hex nut
g303671
For Machines without a Cab
1.
Remove the tie-down bracket from the platform
(Figure
18).
Retain the parts.
1. Tie-down bracket
2. Bolt
2.
Secure the light cross mount to the platform
using the previously removed bolts, nuts, and
tie-down bracket
1. Bolt
2. Tie-down bracket
8
Figure 18
3. Nut
(Figure
19).
Figure 19
3. Light cross mount
4. Nut
g299562
g303700
Advertisement
