Toro 31991 Installation Instructions Manual page 13

1. Wire-harness routing
1. Route the wire-harness connector labeled
F L LH (P04) to the left side of unit.
RONT IGHT
Connect harness to light
2. Route the wire-harness connector labeled
F L RH (P05) to the right side of unit.
RONT IGHT
Connect harness to light
3. Route the wire-harness connector labeled R
L LH (P01) to the rear left side of unit
IGHT
(Figure 33).
4. Route the wire-harness connector labeled R
L RH (P02) to the rear right side of unit
IGHT
(Figure 33).
Figure 33
(Figure 33).
(Figure 33).
EAR
EAR
13
g304235