Advertisement
4
Installing the Front
Components
Parts needed for this procedure:
1
Left light base (for machines with a cab)
1
Right light base (for machines with a cab)
1
Left light mount (for machines with a cab)
1
Right light mount (for machines with a cab)
1
Left light assembly (for machines with a cab)
1
Right light assembly (for machines with a cab)
Button-head bolt (1/4 x 5/8 inch)—for machines with
6
a cab
4
Carriage bolt (3/8 x 3/4 inch)—for machines with a cab
4
Locknut (3/8 inch)—for machines with a cab
1
Light cross mount (for machines without a cab)
2
Yellow reflective tape
For Machines with a Cab
1.
Secure the left light base and right light base
to the cab frame using 2 carriage bolts (3/8 x
3/4 inch) and 2 locknuts (3/8 inch) on each side
(Figure
14).
Figure 14
1. Carriage bolt (3/8 x 3/4
inch)
2. Locknut (3/8 inch)
g303644
3. Right light base
4. Left light base
2.
Secure the left light mount and right light mount
to the light bases using 3 button-head bolts (1/4
x 5/8 inch) through the speed nuts on each side
(Figure
15).
Note:
Ensure that you install the left light mount
and right light in the most narrow mounting
position.
1. Light base
2. Right light mount
7
Figure 15
3. Button-head bolt (1/4 x 5/8
inch)
4. Left light mount
g303645
Advertisement
