Download Print this page
Valcom VIP-430A-IC Quick Start Manual

Valcom VIP-430A-IC Quick Start Manual

Informacast compliant ip wall speaker

Advertisement

Quick Links

INTRODUCTION
The VIP-430A-IC InformaCast Compliant IP Wall
Speaker enables handsfree talkback access to a
single location over an IP-based LAN/WAN. This
allows a handsfree talkback extension anywhere
on the network. The speaker levels are
electrically adjusted during setup. The enclosure
is made of steel with a durable gray powder
coated finish. The color of the enclosure can
easily be changed to match any decor. A
detachable black clothe grille is included. A call
switch input is provided for the remote speaker
location signaling.
Power is provided to the VIP-430A-IC via a
Power over Ethernet (PoE) switch meeting the
802.3af specification.
SPECIFICATIONS
Features
RJ-45 for network connection
Power over Ethernet (PoE) 802.3af
compatible
DIMENSIONS/WEIGHT
10.13" H x 12.31" W x 4.63" D
(25.73cm x 31.27cm W x 11.75cm D)
Weight: 4.53 LBS (1.91 kg)
Nominal Power Requirements
Via 802.3af PoE Ethernet Switch:
PSE (Power Sourcing Equipment) to be
compliant to IEEE 802.3af
Environment
Temperature:
Humidity:
0 to 85% non-precipitating
VIP-430A-IC
InformaCast® Compliant
IP WALL SPEAKER
Class 3
0 to +40° C
1
These products are intended for use with a UL
Listed power source marked "Class 2" or "LPS"
rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended for
intra-building.
Precautionary Designations
WARNING-To Reduce The Risk Of Fire Or
Electric Shock. Do Not Expose This
Apparatus To Rain Or Moisture.
AVERTISSEMENT - Afin de réduire les
risques d'incendie ou de décharge
électrique, évitez d'exposer le système à la
pluie ou à l'humidité.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
• L'appareil ne doit pas être exposé à des
égouttements et éclaboussures et aucun
Objet Rempli de liquide, comme vase, ne
doit être placé sur l'appareil.
Issue 2
947576

Advertisement

loading

Summary of Contents for Valcom VIP-430A-IC

  • Page 1 A call switch input is provided for the remote speaker location signaling. Power is provided to the VIP-430A-IC via a These products are intended for use with a UL Power over Ethernet (PoE) switch meeting the Listed power source marked “Class 2”...
  • Page 2 Use a standard instructions. Ne pas bloquer les ouvertures de ventilation. Installer formément aux instructions du patch cable to connect the VIP-430A-IC to an fabricant. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other Ethernet switch providing Power over Ethernet apparatus (including amplifiers) that produce heat.
  • Page 3 Figure 1. Connections Warranty information may be found on our website at www.valcom.com/warranty. Setup The VIP-430A-IC will automatically acquire an IP address (using DHCP) and connect to the InformaCast server when connected to the network and powered up. Information specific to your application will need to be programmed into the InformaCast server.