Download Print this page
Valcom VIP-430A Installation Manual

Valcom VIP-430A Installation Manual

Ip wall speaker

Advertisement

Quick Links

INTRODUCTION
The VIP-430A IP Wall Speaker enables
handsfree talkback access to a single location
over an IP-based LAN/WAN. This allows a
handsfree talkback extension anywhere on the
network. The speaker levels are electrically
adjusted during setup. The enclosure is made of
steel with a durable gray powder coated finish.
The color of the enclosure can easily be changed
to match any decor. A detachable black clothe
grille is included. A call switch input is provided
for the remote speaker location signaling.
Power is provided to the VIP-430A via a Power
over Ethernet (PoE) switch meeting the 802.3af
specification.
DIMENSIONS/WEIGHT
10.13" H x 12.31" W x 4.63" D
(25.73cm x 31.27cm W x 11.75cm D)
Weight: 4.25 LBS (1.91 kg)
Environment
Temperature:
Humidity:
0 to 85% non-precipitating

Packing List

Qty.
1
VIP-430A
1
VSP Document
VIP-430A
IP WALL SPEAKER
0 to +40° C
Item
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified serv ice personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
1
Issue 1
Issue 1
947804

Advertisement

loading

Summary of Contents for Valcom VIP-430A

  • Page 1: Packing List

    FCC Information This equipment has been tested and found to Power is provided to the VIP-430A via a Power comply with the limits for a Class A digital over Ethernet (PoE) switch meeting the 802.3af device, pursuant to Part 15 of the FCC Rules.
  • Page 2 Call Switch Connection IMPORTANT SAFETY INFORMATION The VIP-430A provides a call switch input via CONSIGNES DE SÉCURITÉ IMPORTANTES 1. Read these instructions. screw terminal connections, labeled Switch 1 Lisez ces instructions. 2. Keep these instructions. and Ground. Conservez ces instructions.
  • Page 3: Technical Assistance

    VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.