Page 1
C-120 Mojo Access Point Quick Start Guide Package Contents You should have received the following components in your C-120 package. C-120 Mounting Bracket...
Page 2
Mounting the C-120 1. Affix bracket to T - Grid 2. Rotate bracket to snap on toT- Grid 3. Place first screw on device on the 4. Rotate device on the bracket lower notch on bracket 5. Ensure all screws on device are snapped...
Page 3
If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and plug the other end into the Ethernet + PoE port (LAN1) on the C-120. Make sure the PoE source you are using is turned ON.
Page 5
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 6
IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the C-120 and is the answer not in the manual?
Questions and answers