C-130 Mojo Access Point Quick Start Guide Package Contents The C-130 package must contain the following components. C-130 15/16” (24mm) Mounting Bracket...
Page 2
Mounting the C-130 1. Affix bracket to T - Grid. 2. Rotate bracket to snap on to T- Grid. 3. Place the first mounting post on the 4. Rotate the device such that the rear-side of the device on to the center mounting post fits in to the lower notch of the bracket.
Page 3
Step 1: Power Up the Device Plug one end of an Ethernet cable into the PoE+ (802.3at) switch or injector and the other end into the Ethernet/PoE+ port on the C-130. Ensure the PoE+ source you are using is turned ON.
Need help?
Do you have a question about the C-130 and is the answer not in the manual?
Questions and answers