W-118 Access Point Quick Start Guide Package Contents You should have received the following components in your W-118 package. W-118 Mounting Bracket Mounting Accessories...
Page 2
Mounting the W-118 Wall Mount: Mojo logo facing away from the wall Affix the mounting bracket on to the wall using the appropriate screws from the mounting accessories included in the package. Connect the cables to the appropriate ports in the rear-side of the device.
Page 3
If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and plug the other end into the WAN port (PoE) on the W-118. Ensure that the PoE source you are using is turned ON.
Need help?
Do you have a question about the W-118 and is the answer not in the manual?
Questions and answers