Mojo C-110 Quick Start Manual

Mojo C-110 Quick Start Manual

Access point / sensor

Advertisement

C-110 Mojo Access Point / Sensor

Quick Start Guide

Package Contents

You should have received the following components in your C-110 package.
C-110
15/16" (24mm) Mounting Bracket

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mojo C-110

  • Page 1 C-110 Mojo Access Point / Sensor Quick Start Guide Package Contents You should have received the following components in your C-110 package. C-110 15/16” (24mm) Mounting Bracket...
  • Page 2 Mounting the C-110 1. Affix bracket to T - Grid. 2. Rotate bracket to snap on to T- Grid. 3. Place the first mounting post on the rear-side of the device on to the lower notch of the bracket. 4. Rotate the device such that all the...
  • Page 3 If using PoE, plug one end of the Ethernet cable into the PoE switch or injector and plug the other end into the Ethernet + PoE port (LAN1) on the C-110. Make sure the PoE source you are using is turned ON.
  • Page 4 T +1.877.424.7844 T 650.961.1111 F 650.961.1169 www.mojonetworks.com info@mojonetworks.com © 2016 Mojo Networks, Inc. All rights reserved. Mojo Networks and the Mojo Networks logo are trademarks, and Mojo is a registered trademark of Mojo Networks, Inc. All other trademarks mentioned herein are properties of their respective owners. Specifications are...
  • Page 5 Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz.Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. For indoor use only. Pour une utilisation en intérieur uniquement.
  • Page 6 This device is restricted for indoor use.

Table of Contents