Advertisement
Quick Links
Advertisement
Related Manuals for Salus Rogers Smart Thermostat 7 Series
Summary of Contents for Salus Rogers Smart Thermostat 7 Series
- Page 1 Smart Thermostat Set-Up Guide...
- Page 2 Thanks for choosing Rogers Smart Home Monitoring! Once you've set-up your Smart Thermostat, you will be able to control the temperature of your home from your smartphone. You can also create custom heating and cooling schedules, to lower energy use and save on heating/ cooling costs.
-
Page 3: Helpful Hints
Helpful hints Please refer to the enclosed manufacturer’s installation guide for operating and safety instructions. To avoid injury, read all set-up and safety information included in your package before installing and setting up your device. As set out in your service agreement, Rogers will not be liable for any damage to your property as a result of your installation. - Page 4 Pairing the Smart Thermostat with your Touchpad Remove the back plate from the Smart Thermostat and insert 2 AA batteries. After inserting the batteries, the display will flash all the segments, followed by the firmware version number, then displays US/CA with a blinking US. To configure the Smart Thermostat to the desired values, press the the button or use the slider ring to select the desired value, then press on Mode.
- Page 5 The Smart Thermostat will then show the words Will Pair as shown here. Press Mode button again to enter pairing mode. The Smart Thermostat will show the word Pairing with the network icon flashing as shown here. The Smart Thermostat will then go to its home screen with the word Identify flashing.
- Page 6 On the Touchpad, select the Settings app from the Home Screen. Enter your 4-digit Master Access Code. (The same code that you use to manage your system.) Under the Categories list select Home Devices. Smart Home Monitoring | Smart Thermostat | Touchpad Set-Up...
- Page 7 Scroll down and select Thermostats, then select Thermostat. On the Locating Thermostat Devices screen press Next, and the system will take up to 30 seconds to find the Smart Thermostat. On the Touchpad a Pairing icon will appear and change to a Thermostat icon once pairing is complete.
- Page 8 Click Done once the Thermostat icon appears and hit Next to confirm. The Thermostat icon will appear again. Tap on the Thermsotat icon to customize its name (e.g. Main Floor Thermostat). Click Return to Menu complete the pairing of the Smart Thermostat.
- Page 9 Your installation is done! Your Smart Thermostat is now part of your Smart Home Monitoring system. Now you can control your furnace and A/C remotely with your Touchpad, your smartphone app and through the Web Control Centre. Start using this device: Use your smartphone app or visit the Web Control Centre at smarthome.rogers.com ·...
- Page 10 How to remove this device from your system: Should you need at any point in the future to remove your Smart Thermostat from your Rogers Smart Home Monitoring system, follow the steps below: 1. Ensure your Smart Home Monitoring system is disarmed. 2.
- Page 11 4. Select Home Devices under the Categories list. 5. Under Home Devices, select Thermostats. On the next screen, select Delete Thermostats. 6. Now, select the Smart Thermostat you want to delete and press to confirm. The Smart Thermostat you selected has now been removed from your system.