Download
Share
Print this page
Ofna Racing DM-ONE PRO TOURING RTR X-SIZE NITRO SEDAN Instruction Manual
  1. Manuals
  2. Brands
  3. Ofna Racing Manuals
  4. Motorized Toy Car
  5. DM-ONE PRO TOURING RTR X-SIZE NITRO SEDAN
  6. Instruction manual

Ofna Racing DM-ONE PRO TOURING RTR X-SIZE NITRO SEDAN Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Features:
*High impact large front bumper and foam bumper.
*CNC machined steel transmission bevel gears.
*High Impact plastic front shock mount.
*High Impact plastic rear shock mount with heat sink.
*Low C. G. lay-down steering servo and throttle servo mount.
*Front and rear push rod suspension design.
*Threaded lay-down 13mm big bore shocks for front and rear.
*Adjustable ackerman steering geometry design.
*Aluminum front plate.
*Aluminum low centre of gravity radio tray.
*Front pivot ball suspension with dust boot covers.
*Rear pivot ball uprights for quick geometry changes.
*Spring steel universal joints for front and rear.
*Adjustable blade type sway bar for front and rear.
*Adjustable down-stop and up-stop suspension design.
*High Impact plastic chassis brace.
ADDITIONAL PARTS NEEDED
* Batteries 8 AA for Radio
* Receiver Batteries (10202 Hump Pack)
* Model Fuel 20% Nitro
* CA Glue
* Hobby Knife
RTR
INSTRUCTION MANUAL
*Quick release centre differential mount design.
*Convenient carry handle In the centre of the car.
*Changeable roll centre design for front and rear suspension.
*Machined steel discs brake.
*Shoe type 2 speed transmission.
*CNC machined clutch bell with screw-on changeable gears.
*CNC machined 6065 aluminium, milled out slim line chassis.
*Secure transponder mount.
*High flow air filter for maximum engine protection.
*Side body mounts and body protector.
*Rear air flow diffuser creates more down force.
*Exhaust deflector design to protect the inside of the body.
*Chrome exhaust pipe detail parts.
*High grip radial tires on 17mm hex wheels.
*Choice of different body designs.
THIS IS NOT A TOY !
This kit is extremely fast, and can easily
go over 40mph and can seriously injured
someone. If you are under 18years of age
have and adult supervision.
DEC 3 2007

Advertisement

loading
Need help?

Need help?

Do you have a question about the DM-ONE PRO TOURING RTR X-SIZE NITRO SEDAN and is the answer not in the manual?

Questions and answers

Related Manuals for Ofna Racing DM-ONE PRO TOURING RTR X-SIZE NITRO SEDAN

Summary of Contents for Ofna Racing DM-ONE PRO TOURING RTR X-SIZE NITRO SEDAN

  • Page 1 INSTRUCTION MANUAL Features: *High impact large front bumper and foam bumper. *Quick release centre differential mount design. *CNC machined steel transmission bevel gears. *Convenient carry handle In the centre of the car. *Changeable roll centre design for front and rear suspension. *High Impact plastic front shock mount.
  • Page 2 MUST READ THIS BEFORE RUNNING Running a nitro kit is fun and easy, but to make this a safe • Clean oil and dirt from chassis with a degreaser. and good experience you must observe a few rules. This Precautions kit is extremely fast, easily over 40MPH, and can seriously •...

  • Page 3: Required For Operation

    REQUIRED FOR OPERATION THINGS NEED BESIDES THE KIT 3.5 cc (21 Class) ENGINE REAR EXHAUST OFNA/Picco P-9R EVO #51219 Glow Plug Long Heat with Battery & Charger # 10215..$27.95 (please note OFNA Glow Heats available) Glow Fuel Bottle’s with spout # 10160 - large 500cc # 10161 - large 500 ccAuto Stop # 10162 - small 250cc...
  • Page 4 PLASTIC PARTS FOR USE 40533 40538 40537 REAR UPPER ARM FRONT AND REAR GEAR BOX DIFF. CASE 40717 40718 FRONT AND REAR LOWER ARM FRONT KNUCKLE ARM 첿 メ 짾 햡 띠 쉐 쾧 ガ 쭌 쪿 츁 L . R띠 쉐 40716 FRONT UPPER ARM 31304...
  • Page 5 PLASTIC PARTS FOR USE 40539 40541 40722 SERVO SAVER RECEIVER BOX EXHAUST GAS DEFLECTOR Parts for Not Use Parts for Not Use 40735 40719 EXHAUST PIPE DETAIL PARTS ARM HOLDER AND BACK MIRROR 40720 40734 SIDE IMPACT BUMPER AND BODY POST REAR WING AND WING MOUNT SYMBOL USED THROUGHOUT THE INSTRUCTION MANUAL Degrease With...
  • Page 6 ASSEMBLY OF THE FRONT AND REAR SHOCKS Step 1 Step 2 Step 3 Fit the o-ringinto groove Make 4 shocks for Front and Rear. before assembly. 40636 40090 15x1mm 40634 40640 7mm R-ring O-Ring Pressure Top Spring Adjuster (Orange) 40090 40090 2mm Washer 3.5mm O-Ring...
  • Page 7 ASSEMBLY OF THE FRONT AND REAR DIFF. Step 1 Step 2 Builds two differentials for front and rear. 40513 Diff. Gear 40010 36053 2.5x13.8mm Pin 8X16mm ..x4 Ball Bearing 40538 Diff. Case 40010 2.5x13.8mm 94034 4x4mm 40514 Set Screw ..x2 Cap Joint 40009 40009...
  • Page 8 ASSEMBLY OF THE SERVO SAVER 40037 Steering Plate Hex Screw 40510 40539 Servo Saver Step 1 Step 2 4x8mm Tube *Tighten the steering plate hex screw Plastic Flange all way down and then back it off 1/2 Bushing turn. 40539 Servo Saver 40746 Horn...
  • Page 9 ASSEMBLY OF THE STEERING TIE-ROD Assembly for both left and right side. 40548 Step 1 Step 2 40038 Nylon Nut 7mm Ball (Thin Type) 40548 Nylon Nut(Thin Type) 36700 ..x2 7mm Steering 40038 7mm Ball Ball End 40126 3X6mm Flange Washer ..x2 36790 4x46mm...
  • Page 10 ASSEMBLY OF THE FRONT SHOCK STAY Assembly for both left and right side. 3x15mm Hex Screw Ensure Free 40719 Movement Do Not Shock Mount(A) Over Tighten 36742 40719 Shock Cap Bushing Shock Mount(B) ..X2 39242 5x8x2.5mm Ball Bearing 39242 5x8x2.5mm Ball Bearing ..X4 36742...
  • Page 11 ASSEMBLY OF THE REAR UPPER ARMS Left Right *Insert the caster angle adjuster onto arm shaft. *Set the left and right hand side upper 40546 arm adjuster to the same direction. 3x42.7mm 40716 Arm Shaft Caster Angle Adjuster (2mm) 40716 Caster Angle Adjuster (1mm) 94020...
  • Page 12 ASSEMBLY OF THE REAR SHOCK ONTO SHOCK STAY Assembly for both left and right side. Do Not Over Tighten 3x8mm Washer Nylon Nut 40643 3x12mm Shock Cap Hex Screw Washer Do Not 94041 Over Tighten *Take the shock cap washer from shock plastic tree.
  • Page 13 ASSEMBLY OF THE TWO SPEED TRANSMISSION INTO THE CENTER MOUNT 3x10mm Hex Screw 3x10mm Step 1 Step 2 Hex Screw 40040 Center Diff. Mount 40040 Center Diff. 40719 Mount Center Diff. 40040 Mount Plate 5x8mm Plastic 40040 ..x1 5x8mm Plastic 94003 3x10mm 40547...
  • Page 14 ASSEMBLY OF THE FRONT LOWER ARMS Assembly for both left and right side. Step 1 Step 2 94035 3x8mm 40717 Set Screw ..x2 Front Lower Arm 4x10mm Set Screw 36870 4x10mm Set Screw ..x2 40719 Stabilizer mount 40719 Stabilizer Balance 31308 94005 Adjuster...
  • Page 15 ASSEMBLY OF THE FRONT KNUCKLE ARMS Assembly for both left and right side. Step 1 Step 2 *Notice the direction of the plastic washer. 40718 Ball type Ensure Knuckle Arm(left) Free Movement 36903 14mm Steering Ball 94049 40718 2.6x8mm Plastic Washer Cap Screw ..x8 36904...
  • Page 16 ASSEMBLY OF THE REAR SUSPENSION ARMS Assembly for both left and right side. *Insert the drive shaft before assembly. 3x25mm Hex Screw 94041 Nylon Nut ..x2 34028 94008 Rear Nylon Nut 3x25mm Driver Shaft Hex Screw ..x2 ASSEMBLY OF THE FRONT PUSH RODS Assembly for both left and right side.
  • Page 17 ASSEMBLY OF THE TWO SPEED TRANSMISSION ONTO THE CHASSIS 40710 Center Drive Shaft *Insert drive shaft into cap joint before assembly 94009 two speed onto chassis. 4x10mm Flat Head Hex Screw ..x4 40710 Center Drive Shaft 4x10mm Flat Head Hex Screw ASSEMBLY OF THE CLUTCH Step 1 Step 2...
  • Page 18 ASSEMBLY OF THE MANIFOLD AND MUFFLER 3x12mm Cap Screw 31991 Manifold Step 1 Step 2 30481 3x12mm Nylon Straps Cap Screw ..x4 (Middle) 31994 10185 Muffler Silicone Tube 40674 Engine Mount ASSEMBLY OF THE ENGINE ONTO THE CHASSIS Note book Paper. 10114 Engine Mount Screw...
  • Page 19 ASSEMBLY OF THE FUEL TANK ONTO THE CHASSIS 3x10mm Step 1 Step 2 Hex Screw 40543 94019 Fuel Tank 3x10mm Flat Head Hex Screw ..x2 Do Not Over Tighten 94003 3x10mm Hex Screw ..x2 Pressure Nipple 40539 Fuel Tank 3x10mm Post Flat Head Hex Screw...
  • Page 20 ASSEMBLY OF THE THROTTLE LINKAGE 3x5mm Hex Screw Tighten 3x3mm 30802 3x8mm Step 1 Step 2 Set Screw Washer Throttle Ball End 10300 3x10mm 2.6x6mm Alum Hex Screw 30172 Washer Stopper 2X68mm 30531 ..x3 Brake Rod Throttle 30802 Spring Adjust Mount 39242 5x8x2.5mm 2.6x10mm...
  • Page 21 ASSEMBLY OF THE SIDE BODY POST 40720 Side Body Support Rear Front 94020 3x12mm Flat Head Hex Screw ..x8 3x12mm Flat Head Hex Screw Do Not Over Tighten 3x12mm Flat Head 3x12mm Hex Screw Flat Head Do Not Hex Screw Over Tighten ASSEMBLY OF THE SIDE IMPACT BUMPER &...
  • Page 22 ASSEMBLY OF THE FRONT BUMPER Completely Finished 40117 4x10mm Body Post Set Screw Step 1 Step 2 40720 36870 Body Post 4x10mm Set Screw ..x2 40117 94026 Body Post 4x12mm Flat Head Hex Screw ..x2 40721 Front Bumper Top Plate 31159 Body Clip Approx.
  • Page 23 ASSEMBLY OF THE REAR EXHAUST PIPE DETAILS 4x10mm Hex Screw Tighten 3x8mm Step 1 Step 2 Hex Screw 3x12mm Hex Screw 94040 3x8mm Washer Tighten ..x2 94002 3x8mm Hex Screw ..x2 3x8mm Washer 94004 3x12mm Hex Screw ..x2 40735 94009 Muffler Mount 4x10mm Hex Screw...
  • Page 24 ASSEMBLY OF THE WHEELS ONTO THE FRONT KNUCKLE AND REAR HUB Assembly of the right and left hand side are the same. 40550 Step 1 Wheel Nut 40550 Wheel Nut ..x4 *Notice the direction of the tire pattern. Tire and Wheel assembly.
  • Page 25 ASSEMBLY OF THE REAR VIEW MIRRORS AND WIPERS 40735 Wiper holder 40735 Wiper 2x6mm Cap Screw 40735 Rear View Mirrror 40735 *Make two 5mm holes in each side *Put the body clips from Rear View Mirror for rear wing mount. inside the body.

  • Page 26: Starting Of The Engine

    STARTING OF THE ENGINE A 12V Starter and Starter Glow Plug (Not Included) 1.2V Glow Plug Igniter and How to start the engine: Ring ( Not Included) Charger (Not Included) 1. Turn on transmitter and then receiver. 2. Fill fuel tank with fuel bottle. 3.
  • Page 27 OPERATING YOUR MODEL SAFELY Before Running Engine Start-Up While Running Cautions for Safety Check that the model turns in For engine use, refer to the Your radio control model can Do not run your model through proportion to the amount you manual included with the engine.

  • Page 28: Setting Guide

    SETTING GUIDE FRONT TOE-IN AND TOE-OUT SETTING Use a 2.5mm allen wrench to adjust toe-in for front and rear. NEUTRAL POSITION (Front) Adjust the length of the front steering rod to change the toe angle. TOE-IN Making the steering rod longer will make the front tires become TOE-OUT TOE-OUT toe-in.

  • Page 31: Owner's Registration Card

    The registration card should be filled out and mailed to OFNA Racing within 10 days of purchase date. In the event that the kit is incomplete or component parts are broken due to error in manufacturer, contact your dealer from which you purchased the kit for replacement part or call OFNA at (949) 586-2910 for your nearest dealer location.