Table of Contents
Advertisement
Default Policy: Set how to handle the packet if none of the rules matches.
IP Setting: Select the Internet Protocol version.
MAC address: Set the MAC address that will be filtered.
Source IP Address: Set the source IP address that will be filtered.
Dest. IP Address: Set the destination IP address that will be filtered.
Protocol: Set which protocol will be used for filtering.
Action: Set how to handle the packet if it matches with the rule.
Comment: Type comment for the filter settings.
NOTE:
Filtering rules are matched one by one, if met this provision, it will not continue to match the rules listed
below.
To add a new rule:
1. Input the detail information in the Mac/IP/Port Filtering area.
2. Click Apply in the Mac/IP/Port Filtering area.
Confidential and Proprietary Information of ZTE CORPORATION 17
Advertisement
Table of Contents
