Zte MF275U User Manual page 14

After the client is connected to your router successfully, you can access the Internet in the
Automatic or Manual mode. The default mode is Automatic.
Mode
Automatic Your router will connect to the Internet automatically, and your clients can surf on
the Internet directly.
Log in the webGUI configuration page, and select Settings > Network Settings >
Manual
Dial-up Settings > Manual (To change current setting, please disconnect from
network), then Apply.

Network Selection
Select Settings > Network Settings > Network Selection, you can change network selection the mode as
follows:

APN
To connect to the Internet you can use the default Access Point Names (APNs) in Auto/Manual mode,
select Settings > Network Settings > APN.
12 Confidential and Proprietary Information of ZTE CORPORATION
Operations