Product Description; Use And Operation - Klarstein 0029304 Manual

1 Handle
6 Fan mask
Before first Use
• Remove the exterior and interior packing
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level
your appliance, adjust the front legs at the bottom of the appliance.
• For recedes installation away from direct sunlight and sources of heat (stove, heater, radiator, etc.).Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold
or hot ambient temperatures may also cause the appliances not to perform properly.
• Not designed for placement in adage or basement.
• The appliance is for indoor use only.
• Caution: Please keep the appliance away from substance, which can cause ignition.
Placement
It is recommended that you installed the wine cooler in a place where the ambient temperature is between
10-26 °C. If the ambient temperature is above or below recommended temperatures, the performance of the
unit may be affected and the range of 11-18 °C may not be reached. The temperature may fluctuate depending
on whether or not the interior light is on or off or whether the bottles are located on the upper, middle or lower
section.
7

Product Description

2 Shelf 3 Door
7 Display 8 Temperature +

Use and Operation

4 Foot 5 Lower hinge
9 Temperature - 10 Upper hinge