Product Description; Installation; Before First Use; Use And Operation - Klarstein 10028010 Manual

1 Temperature control
2 Light
3 Fan mask
4 Shelf
5 Foot
6 Water box
7 Ream cover
8 Can dispenser
9 Magnetic seal
10 Door
• Install refrigerator in a convenient location away from extreme
heat and cold.
• Allow suffi cient clearance between the refrigerator and side wall so
the door will open without obstruction. Refrigerator is not designed
for recessed installation.
• Select a space with strong level fl oor.
• Allow 5 cm of space between the refrigerator's side & wall and 10
cm between back & the wall.
• Clean the appliance, and be thorough, especially in the interior (See „Cleaning and Care").
• In case the interior accessories are not correctly placed, rearrange them as described in chapter

„Product Description".

11. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
12. Clean the interior with a clean moist cloth.
13. Insert the power supply cord into the socket.
14. Tum the thermostat dial to „5" or „low".
15. Close the door and let the refrigerator and operate it emty for 1-2 hours, before you store any
food inside.
Normal Operating
When the refrigerator works with full power, the two LEDs on the circuit board will fl ash. The red
one shows the power input status. The green one shows the output status of the cooling system.
Meanwhile the fan inside the refrigerator begins to work When the door is opened, the light under
the temperature adjuster will turn on automatically.
7
Product Description

Installation

Before First Use

Use and Operation