Dimplex 6901860100 Parts & Service Manual page 11

If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
TO REPLACE THERMOSTAT CONTROL
1. Unplug the unit from power outlet.
2. On the back of the unit, remove the 10 screws along the top, sides and bottom from
the Compact Fireplace, and the 2 screws from the light access cover that secure it to
the mantel.
3. Carefully remove the Compact Fireplace from the mantel holding onto the front glass
so that it does not move.
WARNING
The front glass is held to the Compact Fireplace with double sided tape and could come
apart when separated from the mantel
4. Remove the front glass and set aside.
5. Remove the log set screw and remove the log set.
6. Lay the Compact Fireplace on its back.
7. Remove the 4 bottom access panel screws and separate the bottom access panel
from the unit.
8. Locate the thermostat control and pull off the thermostat control knob to expose the
mounting screws.
9. Remove the mounting screws.
10. Disconnect the wiring connections noting their original locations and remove the
thermostat control switch.
11. Properly orientate the new thermostat control switch and reconnect all wiring
connections.
12. Reassemble in the reverse order as above.
MOUNTING SCREWS
THERMOSTAT CONTROL KNOB
10