Advertisement
5
Installing the Right Fender
onto the Machine
No Parts Required
Procedure
1. Align the right fender with the holes where the 5 bolts
and the 5 locknuts were removed in 3 Removing the
Right Fender from the Machine (page 3).
2. Install the 5 bolts and the 5 locknuts into the back
ROPS plate, front ROPS plate, and the right fender
(Figure 2 and Figure 3).
6
Installing the
Position-indicator Pointer
Parts needed for this procedure:
2
Locknut (M10)
1
Position-indicator pointer
Procedure
1. Insert the position-indicator cable through the side of
the steering-indicator plate (Figure 8).
1. Position-indicator pointer
2. Steering-indicator plate
2. Install 2 locknuts (M10) and the position-indicator
pointer onto the position-indicator cable (Figure 8).
3. Position the position-indicator pointer to the middle of
the opening in the steering-indicator plate (Figure 9).
1. Steering-indicator plate
2. Opening for the
position-indicator pointer
5
Figure 8
3. Position-indicator cable
4. Locknuts (M10)
Figure 9
3. Position-indicator pointer
Advertisement
