Table of Contents
Advertisement
Problem
Boot and tubes plug too frequently.
g
Debris blowout.
Possible Causes
q
y
1. Hopper is too full.
2. Low engine speed.
3. Grass is too wet.
4. Grass is too long.
5. Plugged fan screen.
6. Ground speed is too fast.
1. Hopper is too full.
2. Ground speed is too fast.
3. Center baffle not installed.
4. Mower is not leveled.
1. Dump more frequently.
2. Always operate the bagger at
full throttle.
3. Cut grass when dry.
4. Cut no more that 2–3 inches or
1/3 of the grass height, which
ever is less.
5. Remove debris, leaves or grass
clippings from the fan screen.
6. Drive slower at full throttle.
1. Dump more frequently.
2. Drive slower at full throttle.
3. Install the center baffle when
bagging leaves.
4. See the mower operator's
manual for leveling the mower.
21
Corrective Action
Advertisement
Table of Contents
