Specifications; General Specifications; Optional Equipment - Toro Sand Pro Cyclone 1000 Operator's Manual

Specifications

Note: Specifications and design subject to change without notice.

General Specifications

Fan
Fan Housing
Fan Drive
Fan Speed
Fan Output
Outlet
Weight

Optional Equipment

Discharge Chute Kit
Backward curved, cast aluminum fan. 12 blades per side, 21" outside diameter,
6.375" width, 34 lbs.
10 gauge steel face plates welded to 10 gauge wrapper. Increasing scroll from
cutoff.
PTO driven single B section belt drive to fan. Final drive ratio of 1.4:1 with a over
running clutch pulley on input shaft. PTO and fan shaft rotate on greaseable ball
bearing.
2100 rpm
2850 CFM, 85 mph.
Outlet opening is 46 square in. with adjustable discharge deflector.
180 lbs.
Model No. 08860
7