Table of Contents
Advertisement
4
Connecting the Spray Hose
Parts needed for this procedure:
1
Long hose with fitting
1
Spray gun
1
Plastic hose clamp, small
Procedure
1. Wrap Teflon tape around the threads of the hose
fitting on the long hose and install the fitting into the
connecting tube on the reel (Figure 17).
Figure 17
2. Connect the free end of the long hose to the fitting
on the spray gun (Figure 18).
Figure 18
3. Secure the end of the hose with a small hose clamp.
4. Connect the negative battery wire to the battery.
5. Press the hose wind button and carefully guide the
hose onto the reel moving the hose from side to side
to evenly distribute the hose.
CAUTION
Hands, loose clothing, long hair, and jewelry
could get caught in the hose and reel while
rewinding and cause injury.
• Keep your hands clear of the reel and hose
while it is rewinding.
• Do not wear loose clothing or jewelry and tie
up long hair.
9
Advertisement
Table of Contents
